unison/doc/manual/source/utilities.rst

.. include:: replace.txt
.. highlight:: bash

.. Section Separators:
   ----
   ****
   ++++
   ====
   ~~~~

.. _Utilities:

Utilities
---------

Print-introspected-doxygen
**************************

`print-introspected-doxygen` is used to generate doxygen documentation
using various TypeIds defined throughout the |ns3| source code.
The tool returns the various config paths, attributes, trace sources,
etc. for the various files in |ns3|.

Invocation
++++++++++

This tool is run automatically by the build system when generating
the Doxygen API docs, so you don't normally have to run it by hand.

However, since it does give a fair bit of information about TypeIds
it can be useful to run from the command line and
search for specific information.

To run it, simply open terminal and type

.. sourcecode::

    $ ./ns3 run print-introspected-doxygen

This will give all the output, formatted for Doxygen, which can be viewed
in a text editor.

One way to use this is to capture it to a file::

    $ ./ns3 run print-introspected-doxygen > doc.html

Some users might prefer to use tools like grep
to locate the required piece of information from the documentation
instead of using an editor. For such uses-cases and more,
`print-introspected-doxygen` can return plain text::

    $ ./ns3 run "print-introspected-doxygen --output-text"

(Note the quotes around the inner command and options.)

    $ ./ns3 run "print-introspected-doxygen --output-text" | grep "hello"

This will output the following::

    * HelloInterval: HELLO messages emission interval.
    * DeletePeriod: DeletePeriod is intended to provide an upper bound on the time for which an upstream node A can have a neighbor B as an active next hop for destination D, while B has invalidated the route to D. = 5 * max (HelloInterval, ActiveRouteTimeout)
    * AllowedHelloLoss: Number of hello messages which may be loss for valid link.
    * EnableHello: Indicates whether a hello messages enable.
    * HelloInterval: HELLO messages emission interval.
    * HelloInterval: HELLO messages emission interval.
    * DeletePeriod: DeletePeriod is intended to provide an upper bound on the time for which an upstream node A can have a neighbor B as an active next hop for destination D, while B has invalidated the route to D. = 5 * max (HelloInterval, ActiveRouteTimeout)
    * AllowedHelloLoss: Number of hello messages which may be loss for valid link.
    * EnableHello: Indicates whether a hello messages enable.
    * HelloInterval: HELLO messages emission interval.



bench-scheduler
****************

This tool is used to benchmark the scheduler algorithms used in |ns3|.

Command-line Arguments
++++++++++++++++++++++

.. sourcecode::

    $ ./ns3 run "bench-scheduler --help"
    bench-scheduler [Program Options] [General Arguments]

    Benchmark the simulator scheduler.

    Event intervals are taken from one of:
      an exponential distribution, with mean 100 ns,
      an ascii file, given by the --file="<filename>" argument,
      or standard input, by the argument --file="-"
    In the case of either --file form, the input is expected
    to be ascii, giving the relative event times in ns.

    Program Options:
	--all:     use all schedulers [false]
	--cal:     use CalendarSheduler [false]
	--calrev:  reverse ordering in the CalendarScheduler [false]
	--heap:    use HeapScheduler [false]
	--list:    use ListSheduler [false]
	--map:     use MapScheduler (default) [true]
	--pri:     use PriorityQueue [false]
	--debug:   enable debugging output [false]
	--pop:     event population size (default 1E5) [100000]
	--total:   total number of events to run (default 1E6) [1000000]
	--runs:    number of runs (default 1) [1]
	--file:    file of relative event times
	--prec:    printed output precision [6]

    General Arguments:
	...

You can change the Scheduler being benchmarked by passing
the appropriate flags, for example if you want to
benchmark the CalendarScheduler pass `--cal` to the program.

The default total number of events, runs or population size
can be overridden by passing `--total=value`, `--runs=value`
and `--pop=value` respectively.

If you want to use an event distribution which is stored in a file,
you can pass the file option by `--file=FILE_NAME`.

`--prec` can be used to change the output precision value and
`--debug` as the name suggests enables debugging.

Invocation
++++++++++

To run it, simply open the terminal and type

.. sourcecode::

    $ ./ns3 run bench-scheduler

It will show something like this depending upon the scheduler being benchmarked::

    bench-scheduler:  Benchmark the simulator scheduler
      Event population size:        100000
      Total events per run:         1000000
      Number of runs per scheduler: 1
      Event time distribution:      default exponential

    ns3::MapScheduler
    Run #       Initialization:                     Simulation:
		Time (s)    Rate (ev/s) Per (s/ev)  Time (s)    Rate (ev/s) Per (s/ev)
    ----------- ----------- ----------- ----------- ----------- ----------- -----------
    (prime)     0.09        1.11111e+06 9e-07       0.98        1.02041e+06 9.8e-07
    0           0.04        2.5e+06     4e-07       0.98        1.02041e+06 9.8e-07

Suppose we had to benchmark `CalendarScheduler` instead, we would have written

.. sourcecode::

    $ ./ns3 run "bench-scheduler --cal"

And the output would look something like this::

    bench-scheduler:  Benchmark the simulator scheduler
      Event population size:        100000
      Total events per run:         1000000
      Number of runs per scheduler: 1
      Event time distribution:      default exponential

    ns3::CalendarScheduler: insertion order: normal
    Run #       Initialization:                     Simulation:
		Time (s)    Rate (ev/s) Per (s/ev)  Time (s)    Rate (ev/s) Per (s/ev)
    ----------- ----------- ----------- ----------- ----------- ----------- -----------
    (prime)     0.3         333333      3e-06       12.77       78308.5     1.277e-05
    0           0.29        344828      2.9e-06     13.66       73206.4     1.366e-05