unison/examples/tcp/tcp-pcap-nanosec-example.cc

/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation;
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

// ============================================================ //
// BASED ON tcp-bulk-send.cc                                    //
// ============================================================ //

// Network topology
//
//       n0 ----------- n1
//            500 Kbps
//             5 ms
//
// - Flow from n0 to n1 using BulkSendApplication.
// - Tracing of queues and packet receptions to file "tcp-pcap-nanosec-example.pcap"
//     when tracing is turned on.
// - Trace file timestamps are recorded in nanoseconds, when requested
//

// ============================================================ //
// NOTE: You can check the "magic" number of a pcap file with   //
//       the following command:                                 //
//                                                              //
//                    od -N4 -tx1 filename.pcap                 //
//                                                              //
// ============================================================ //

#include "ns3/applications-module.h"
#include "ns3/core-module.h"
#include "ns3/internet-module.h"
#include "ns3/network-module.h"
#include "ns3/point-to-point-module.h"

#include <fstream>
#include <string>

using namespace ns3;

NS_LOG_COMPONENT_DEFINE("TcpPcapNanosecExample");

int
main(int argc, char* argv[])
{
    bool tracing = false;
    bool nanosec = false;
    uint32_t maxBytes = 0;

    //
    // Allow the user to override any of the defaults at
    // run-time, via command-line arguments
    //
    CommandLine cmd(__FILE__);
    cmd.AddValue("tracing", "Flag to enable tracing", tracing);
    cmd.AddValue("nanosec", "Flag to use nanosecond timestamps for pcap as default", nanosec);
    cmd.AddValue("maxBytes", "Total number of bytes for application to send", maxBytes);
    cmd.Parse(argc, argv);

    //
    // If requested via the --nanosec cmdline flag, generate nanosecond timestamp for pcap traces
    //
    if (nanosec)
    {
        Config::SetDefault("ns3::PcapFileWrapper::NanosecMode", BooleanValue(true));
    }

    //
    // Explicitly create the nodes required by the topology (shown above).
    //
    NS_LOG_INFO("Create nodes.");
    NodeContainer nodes;
    nodes.Create(2);

    NS_LOG_INFO("Create channels.");

    //
    // Explicitly create the point-to-point link required by the topology (shown above).
    //
    PointToPointHelper pointToPoint;
    pointToPoint.SetDeviceAttribute("DataRate", StringValue("500Kbps"));
    pointToPoint.SetChannelAttribute("Delay", StringValue("5ms"));

    NetDeviceContainer devices;
    devices = pointToPoint.Install(nodes);

    //
    // Install the internet stack on the nodes
    //
    InternetStackHelper internet;
    internet.Install(nodes);

    //
    // We've got the "hardware" in place.  Now we need to add IP addresses.
    //
    NS_LOG_INFO("Assign IP Addresses.");
    Ipv4AddressHelper ipv4;
    ipv4.SetBase("10.1.1.0", "255.255.255.0");
    Ipv4InterfaceContainer i = ipv4.Assign(devices);

    NS_LOG_INFO("Create Applications.");

    //
    // Create a BulkSendApplication and install it on node 0
    //
    uint16_t port = 9; // well-known echo port number

    BulkSendHelper source("ns3::TcpSocketFactory", InetSocketAddress(i.GetAddress(1), port));
    // Set the amount of data to send in bytes.  Zero is unlimited.
    source.SetAttribute("MaxBytes", UintegerValue(maxBytes));
    ApplicationContainer sourceApps = source.Install(nodes.Get(0));
    sourceApps.Start(Seconds(0.0));
    sourceApps.Stop(Seconds(10.0));

    //
    // Create a PacketSinkApplication and install it on node 1
    //
    PacketSinkHelper sink("ns3::TcpSocketFactory", InetSocketAddress(Ipv4Address::GetAny(), port));
    ApplicationContainer sinkApps = sink.Install(nodes.Get(1));
    sinkApps.Start(Seconds(0.0));
    sinkApps.Stop(Seconds(10.0));

    //
    // Set up tracing if enabled
    //
    if (tracing)
    {
        AsciiTraceHelper ascii;
        pointToPoint.EnablePcapAll("tcp-pcap-nanosec-example", false);
    }

    //
    // Now, do the actual simulation.
    //
    NS_LOG_INFO("Run Simulation.");
    Simulator::Stop(Seconds(10.0));
    Simulator::Run();
    Simulator::Destroy();
    NS_LOG_INFO("Done.");

    Ptr<PacketSink> sink1 = DynamicCast<PacketSink>(sinkApps.Get(0));
    std::cout << "Total Bytes Received: " << sink1->GetTotalRx() << std::endl;

    return 0;
}