/* -*- Mode:C++; c-file-style:"gnu"; indent-tabs-mode:nil; -*- */ /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation; * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ // Network topology // // n0 // \ 5 Mb/s, 2ms // \ 1.5Mb/s, 10ms // n2 -------------------------n3 // / // / 5 Mb/s, 2ms // n1 // // - all links are point-to-point links with indicated one-way BW/delay // - CBR/UDP flows from n0 to n3, and from n3 to n1 // - FTP/TCP flow from n0 to n3, starting at time 1.2 to time 1.35 sec. // - UDP packet size of 210 bytes, with per-packet interval 0.00375 sec. // (i.e., DataRate of 448,000 bps) // - DropTail queues // - Tracing of queues and packet receptions to file // "simple-error-model.tr" #include #include "ns3/core-module.h" #include "ns3/network-module.h" #include "ns3/helper-module.h" #include "ns3/ipv4-global-routing-helper.h" using namespace ns3; NS_LOG_COMPONENT_DEFINE ("SimpleErrorModelExample"); int main (int argc, char *argv[]) { // Users may find it convenient to turn on explicit debugging // for selected modules; the below lines suggest how to do this #if 0 LogComponentEnable ("SimplePointToPointExample", LOG_LEVEL_INFO); #endif // Set a few attributes Config::SetDefault ("ns3::RateErrorModel::ErrorRate", DoubleValue (0.01)); Config::SetDefault ("ns3::RateErrorModel::ErrorUnit", StringValue ("EU_PKT")); Config::SetDefault ("ns3::OnOffApplication::PacketSize", UintegerValue (210)); Config::SetDefault ("ns3::OnOffApplication::DataRate", DataRateValue (DataRate ("448kb/s"))); // Allow the user to override any of the defaults and the above // Bind()s at run-time, via command-line arguments CommandLine cmd; cmd.Parse (argc, argv); // Here, we will explicitly create four nodes. In more sophisticated // topologies, we could configure a node factory. NS_LOG_INFO ("Create nodes."); NodeContainer c; c.Create (4); NodeContainer n0n2 = NodeContainer (c.Get (0), c.Get (2)); NodeContainer n1n2 = NodeContainer (c.Get (1), c.Get (2)); NodeContainer n3n2 = NodeContainer (c.Get (3), c.Get (2)); InternetStackHelper internet; internet.Install (c); // We create the channels first without any IP addressing information NS_LOG_INFO ("Create channels."); PointToPointHelper p2p; p2p.SetDeviceAttribute ("DataRate", DataRateValue (DataRate (5000000))); p2p.SetChannelAttribute ("Delay", TimeValue (MilliSeconds (2))); NetDeviceContainer d0d2 = p2p.Install (n0n2); NetDeviceContainer d1d2 = p2p.Install (n1n2); p2p.SetDeviceAttribute ("DataRate", DataRateValue (DataRate (1500000))); p2p.SetChannelAttribute ("Delay", TimeValue (MilliSeconds (10))); NetDeviceContainer d3d2 = p2p.Install (n3n2); // Later, we add IP addresses. NS_LOG_INFO ("Assign IP Addresses."); Ipv4AddressHelper ipv4; ipv4.SetBase ("10.1.1.0", "255.255.255.0"); ipv4.Assign (d0d2); ipv4.SetBase ("10.1.2.0", "255.255.255.0"); Ipv4InterfaceContainer i1i2 = ipv4.Assign (d1d2); ipv4.SetBase ("10.1.3.0", "255.255.255.0"); Ipv4InterfaceContainer i3i2 = ipv4.Assign (d3d2); NS_LOG_INFO ("Use global routing."); Ipv4GlobalRoutingHelper::PopulateRoutingTables (); // Create the OnOff application to send UDP datagrams of size // 210 bytes at a rate of 448 Kb/s NS_LOG_INFO ("Create Applications."); uint16_t port = 9; // Discard port (RFC 863) OnOffHelper onoff ("ns3::UdpSocketFactory", Address (InetSocketAddress (i3i2.GetAddress (1), port))); onoff.SetAttribute ("OnTime", RandomVariableValue (ConstantVariable(1))); onoff.SetAttribute ("OffTime", RandomVariableValue (ConstantVariable(0))); ApplicationContainer apps = onoff.Install (c.Get (0)); apps.Start(Seconds(1.0)); apps.Stop (Seconds(10.0)); // Create an optional packet sink to receive these packets PacketSinkHelper sink ("ns3::UdpSocketFactory", Address (InetSocketAddress (Ipv4Address::GetAny (), port))); apps = sink.Install (c.Get (2)); apps.Start (Seconds (1.0)); apps.Stop (Seconds (10.0)); // Create a similar flow from n3 to n1, starting at time 1.1 seconds onoff.SetAttribute ("Remote", AddressValue (InetSocketAddress (i1i2.GetAddress (0), port))); apps = onoff.Install (c.Get (3)); apps.Start(Seconds(1.1)); apps.Stop (Seconds(10.0)); // Create a packet sink to receive these packets sink.SetAttribute ("Local", AddressValue (InetSocketAddress (Ipv4Address::GetAny (), port))); apps = sink.Install (c.Get (1)); apps.Start (Seconds (1.1)); apps.Stop (Seconds (10.0)); // // Error model // // Create an ErrorModel based on the implementation (constructor) // specified by the default classId Ptr em = CreateObjectWithAttributes ("RanVar", RandomVariableValue (UniformVariable (0.0, 1.0)), "ErrorRate", DoubleValue (0.001)); d3d2.Get (0)->SetAttribute ("ReceiveErrorModel", PointerValue (em)); // Now, let's use the ListErrorModel and explicitly force a loss // of the packets with pkt-uids = 11 and 17 on node 2, device 0 std::list sampleList; sampleList.push_back (11); sampleList.push_back (17); // This time, we'll explicitly create the error model we want Ptr pem = CreateObject (); pem->SetList (sampleList); d0d2.Get (1)->SetAttribute ("ReceiveErrorModel", PointerValue (pem)); AsciiTraceHelper ascii; p2p.EnableAsciiAll (ascii.CreateFileStream ("simple-error-model.tr")); p2p.EnablePcapAll ("simple-error-model"); NS_LOG_INFO ("Run Simulation."); Simulator::Run (); Simulator::Destroy (); NS_LOG_INFO ("Done."); }