diff --git a/doc/tutorial/source/getting-started.rst b/doc/tutorial/source/getting-started.rst
index a981ead6b..2303b22bc 100644
--- a/doc/tutorial/source/getting-started.rst
+++ b/doc/tutorial/source/getting-started.rst
@@ -96,17 +96,17 @@ get a copy of a release by typing the following into your Linux shell
   $ cd
   $ mkdir workspace
   $ cd workspace
-  $ wget http://www.nsnam.org/release/ns-allinone-3.25.tar.bz2
-  $ tar xjf ns-allinone-3.25.tar.bz2
+  $ wget http://www.nsnam.org/release/ns-allinone-3.26.tar.bz2
+  $ tar xjf ns-allinone-3.26.tar.bz2
 
-If you change into the directory ``ns-allinone-3.25`` you should see a
+If you change into the directory ``ns-allinone-3.26`` you should see a
 number of files and directories:
 
 ::
 
   $ ls
-  bake      constants.py   ns-3.25                            README
-  build.py  netanim-3.107  pybindgen-0.17.0.post49+ng0e4e3bc  util.py
+  bake      constants.py   ns-3.26                            README
+  build.py  netanim-3.107  pybindgen-0.17.0.post57+nga6376f2  util.py
 
 You are now ready to build the base |ns3| distribution and may skip ahead
 to the section on building |ns3|.
@@ -166,10 +166,10 @@ distribution of your choice.
 
 There are a few configuration targets available:
 
-1.  ``ns-3.25``:  the module corresponding to the release; it will download
+1.  ``ns-3.26``:  the module corresponding to the release; it will download
     components similar to the release tarball.
 2.  ``ns-3-dev``:  a similar module but using the development code tree
-3.  ``ns-allinone-3.25``:  the module that includes other optional features
+3.  ``ns-allinone-3.26``:  the module that includes other optional features
     such as click routing, openflow for |ns3|, and the Network Simulation
     Cradle
 4.  ``ns-3-allinone``:  similar to the released version of the allinone
@@ -187,7 +187,7 @@ code either by inspection of the repository list or by going to the
 `"ns-3 Releases"
 <http://www.nsnam.org/releases>`_
 web page and clicking on the latest release link.  We'll proceed in
-this tutorial example with ``ns-3.25``.
+this tutorial example with ``ns-3.26``.
 
 We are now going to use the bake tool to pull down the various pieces of 
 |ns3| you will be using.  First, we'll say a word about running bake.
@@ -213,7 +213,7 @@ full builds of ns-3-allinone (with the optional packages) typically do.
 
 Step into the workspace directory and type the following into your shell::
 
-  $ ./bake.py configure -e ns-3.25
+  $ ./bake.py configure -e ns-3.26
 
 Next, we'l ask bake to check whether we have enough tools to download
 various components.  Type::
@@ -265,14 +265,14 @@ should yield something like::
    >> Searching for system dependency qt4 - OK
    >> Downloading pygccxml - OK
    >> Downloading netanim-3.107 - OK
-   >> Downloading pybindgen-0.17.0.post49+ng0e4e3bc (target directory:pybindgen) - OK
-   >> Downloading ns-3.25 - OK
+   >> Downloading pybindgen-0.17.0.post57+nga6376f2 (target directory:pybindgen) - OK
+   >> Downloading ns-3.26 - OK
 
 The above suggests that five sources have been downloaded.  Check the
 ``source`` directory now and type ``ls``; one should see::
 
   $ ls
-  gccxml  netanim-3.107  ns-3.25  pybindgen  pygccxml  pygccxml-1.0.0.zip
+  gccxml  netanim-3.107  ns-3.26  pybindgen  pygccxml  pygccxml-1.0.0.zip
 
 You are now ready to build the |ns3| distribution.
 
@@ -291,7 +291,7 @@ native |ns3| build system, Waf, to be introduced later in this tutorial.
 
 If you downloaded
 using a tarball you should have a directory called something like 
-``ns-allinone-3.25`` under your ``~/workspace`` directory.  
+``ns-allinone-3.26`` under your ``~/workspace`` directory.  
 Type the following::
 
   $ ./build.py --enable-examples --enable-tests
@@ -307,7 +307,7 @@ You will see lots of typical compiler output messages displayed as the build
 script builds the various pieces you downloaded.  Eventually you should see the
 following::
 
-   Waf: Leaving directory `/path/to/workspace/ns-allinone-3.25/ns-3.25/build'
+   Waf: Leaving directory `/path/to/workspace/ns-allinone-3.26/ns-3.26/build'
    'build' finished successfully (6m25.032s)
   
    Modules built:
@@ -355,8 +355,8 @@ and you should see something like::
   >> Building gccxml-ns3 - OK
   >> Building pygccxml - OK
   >> Building netanim-3.107 - OK
-  >> Building pybindgen-0.17.0.post49+ng0e4e3bc - OK
-  >> Building ns-3.25 - OK
+  >> Building pybindgen-0.17.0.post57+nga6376f2 - OK
+  >> Building ns-3.26 - OK
 
 *Hint:  you can also perform both steps, download and build, by calling ``bake.py deploy``.*
 
@@ -507,7 +507,7 @@ A command exists for checking which profile is currently active
 for an already configured project::
 
   $ ./waf --check-profile
-  Waf: Entering directory \`/path/to/ns-3-allinone/ns-3.25/build'
+  Waf: Entering directory \`/path/to/ns-3-allinone/ns-3.26/build'
   Build profile: debug
 
 The build.py script discussed above supports also the ``--enable-examples``