unison/doc/manual/source/python.rst

.. include:: replace.txt
.. highlight:: python

.. heading hierarchy:
   ------------- Chapter
   ************* Section (#.#)
   ============= Subsection (#.#.#)
   ############# Paragraph (no number)


Using Python to Run |ns3|
-------------------------

Python bindings allow the C++ code in |ns3| to be called from Python.

This chapter shows you how to create a Python script that can run |ns3| and also the process of creating Python bindings for a C++ |ns3| module.

Introduction
************

Python bindings provide support for importing |ns3| model libraries as Python
modules.  Coverage of most of the |ns3| C++ API is provided.  The intent
has been to allow the programmer to write complete simulation scripts in
Python, to allow integration of |ns3| with other Python tools and workflows.
The intent is not to provide a different language choice to author new
|ns3| models implemented in Python.

Python bindings for |ns3| use a tool called PyBindGen (https://github.com/gjcarneiro/pybindgen) to create Python modules from the C++ libraries built by
Waf.  The Python bindings that PyBindGen uses are maintained in a 
``bindings`` directory in each module, and must be maintained to match the 
C++ API of that ns-3 module.  If the C++ API changes, the Python bindings file
must either be modified by hand accordingly, or the bindings must be
regenerated by an automated scanning process.

If a user is not interested in Python, he or she may disable the use of
Python bindings at Waf configure time.  In this case, changes to the C++
API of a provided module will not cause the module to fail to compile. 

The process for automatically generating Python bindings relies on a toolchain
involving a development installation of the Clang compiler, a program called
CastXML (https://github.com/CastXML/CastXML), and a program called 
pygccxml (https://github.com/gccxml/pygccxml).  The toolchain can be installed
using the ns-3 ``bake`` build tool.

An Example Python Script that Runs |ns3|
****************************************

Here is some example code that is written in Python and that runs |ns3|, which is written in C++.  This Python example can be found in ``examples/tutorial/first.py``:

::

  import ns.applications
  import ns.core
  import ns.internet
  import ns.network
  import ns.point_to_point
  
  ns.core.LogComponentEnable("UdpEchoClientApplication", ns.core.LOG_LEVEL_INFO)
  ns.core.LogComponentEnable("UdpEchoServerApplication", ns.core.LOG_LEVEL_INFO)
  
  nodes = ns.network.NodeContainer()
  nodes.Create(2)
  
  pointToPoint = ns.point_to_point.PointToPointHelper()
  pointToPoint.SetDeviceAttribute("DataRate", ns.core.StringValue("5Mbps"))
  pointToPoint.SetChannelAttribute("Delay", ns.core.StringValue("2ms"))
  
  devices = pointToPoint.Install(nodes)
  
  stack = ns.internet.InternetStackHelper()
  stack.Install(nodes)
  
  address = ns.internet.Ipv4AddressHelper()
  address.SetBase(ns.network.Ipv4Address("10.1.1.0"), ns.network.Ipv4Mask("255.255.255.0"))
  
  interfaces = address.Assign (devices);
  
  echoServer = ns.applications.UdpEchoServerHelper(9)
  
  serverApps = echoServer.Install(nodes.Get(1))
  serverApps.Start(ns.core.Seconds(1.0))
  serverApps.Stop(ns.core.Seconds(10.0))
  
  echoClient = ns.applications.UdpEchoClientHelper(interfaces.GetAddress(1), 9)
  echoClient.SetAttribute("MaxPackets", ns.core.UintegerValue(1))
  echoClient.SetAttribute("Interval", ns.core.TimeValue(ns.core.Seconds (1.0)))
  echoClient.SetAttribute("PacketSize", ns.core.UintegerValue(1024))
  
  clientApps = echoClient.Install(nodes.Get(0))
  clientApps.Start(ns.core.Seconds(2.0))
  clientApps.Stop(ns.core.Seconds(10.0))
  
  ns.core.Simulator.Run()
  ns.core.Simulator.Destroy()

Running Python Scripts
**********************

waf contains some options that automatically update the python path to find the ns3 module.  To run example programs, there are two ways to use waf to take care of this.  One is to run a waf shell; e.g.:

.. sourcecode:: bash

  $ ./waf shell
  $ python examples/wireless/mixed-wireless.py

and the other is to use the --pyrun option to waf:

.. sourcecode:: bash

  $ ./waf --pyrun examples/wireless/mixed-wireless.py

As of ns-3.30, a --pyrun-no-build option was added to allow the running of
a program without invoking a project rebuild.  This option may be useful
to improve execution time when running the same program repeatedly but with
different arguments, such as from scripts. It can be used in place of
--pyrun such as:

.. sourcecode:: bash

  $ ./waf --pyrun-no-build examples/wireless/mixed-wireless.py

To run a python script under the C debugger:

.. sourcecode:: bash

  $ ./waf shell
  $ gdb --args python examples/wireless/mixed-wireless.py

To run your own Python script that calls |ns3| and that has this path, ``/path/to/your/example/my-script.py``, do the following:

.. sourcecode:: bash

  $ ./waf shell
  $ python /path/to/your/example/my-script.py

Caveats
*******

Python bindings for |ns3| are a work in progress, and some limitations are known by developers.  Some of these limitations (not all) are listed here.

Incomplete Coverage
===================

First of all, keep in mind that not 100% of the API is supported in Python.  Some of the reasons are:

#. some of the APIs involve pointers, which require knowledge of what kind of memory passing semantics (who owns what memory). Such knowledge is not part of the function signatures, and is either documented or sometimes not even documented.  Annotations are needed to bind those functions;
#. Sometimes a unusual fundamental data type or C++ construct is used which is not yet supported by PyBindGen;
#. CastXML does not report template based classes unless they are instantiated. 

Most of the missing APIs can be wrapped, given enough time, patience, and expertise, and will likely be wrapped if bug reports are submitted.  However, don't file a bug report saying "bindings are incomplete", because we do not have manpower to complete 100% of the bindings.

Conversion Constructors
=======================

`Conversion constructors <http://publib.boulder.ibm.com/infocenter/compbgpl/v9v111/topic/com.ibm.xlcpp9.bg.doc/language_ref/cplr384.htm>`_ are not fully supported yet by PyBindGen, and they always act as explicit constructors when translating an API into Python.  For example, in C++ you can do this:

.. sourcecode:: cpp

 Ipv4AddressHelper ipAddrs;
 ipAddrs.SetBase ("192.168.0.0", "255.255.255.0");
 ipAddrs.Assign (backboneDevices);

In Python, for the time being you have to do:

::

 ipAddrs = ns.internet.Ipv4AddressHelper()
 ipAddrs.SetBase(ns.network.Ipv4Address("192.168.0.0"), ns.network.Ipv4Mask("255.255.255.0"))
 ipAddrs.Assign(backboneDevices)

CommandLine
===========

:cpp:func:`CommandLine::AddValue` works differently in Python than it does in |ns3|.  In Python, the first parameter is a string that represents the command-line option name.  When the option is set, an attribute with the same name as the option name is set on the :cpp:func:`CommandLine` object.  Example:

::

    NUM_NODES_SIDE_DEFAULT = 3

    cmd = ns3.CommandLine()

    cmd.NumNodesSide = None
    cmd.AddValue("NumNodesSide", "Grid side number of nodes (total number of nodes will be this number squared)")

    cmd.Parse(argv)

    [...]

    if cmd.NumNodesSide is None:
        num_nodes_side = NUM_NODES_SIDE_DEFAULT
    else:
        num_nodes_side = int(cmd.NumNodesSide)

Tracing
=======

Callback based tracing is not yet properly supported for Python, as new |ns3| API needs to be provided for this to be supported.

Pcap file writing is supported via the normal API.

ASCII tracing is supported since |ns3|.4 via the normal C++ API translated to Python.  However, ASCII tracing requires the creation of an ostream object to pass into the ASCII tracing methods.  In Python, the C++ std::ofstream has been minimally wrapped to allow this.  For example:

::

    ascii = ns3.ofstream("wifi-ap.tr") # create the file
    ns3.YansWifiPhyHelper.EnableAsciiAll(ascii)
    ns3.Simulator.Run()
    ns3.Simulator.Destroy()
    ascii.close() # close the file

There is one caveat: you must not allow the file object to be garbage collected while |ns3| is still using it.  That means that the 'ascii' variable above must not be allowed to go out of scope or else the program will crash.

Working with Python Bindings
****************************

Python bindings are built on a module-by-module basis, and can be found in each module's  ``bindings`` directory. 

Overview
========

The python bindings are generated into an 'ns' namespace.  Examples:

::

  from ns.network import Node
  n1 = Node()

or

::

  import ns.network
  n1 = ns.network.Node()

The best way to explore the bindings is to look at the various example
programs provided in |ns3|; some C++ examples have a corresponding Python
example.  There is no structured documentation for the Python bindings
like there is Doxygen for the C++ API, but the Doxygen can be consulted
to understand how the C++ API works.

Python Bindings Workflow
========================

The process by which Python bindings are handled is the following:

#. Periodically a developer uses a CastXML (https://github.com/CastXML/CastXML) based API scanning script, which saves the scanned API definition as ``bindings/python/ns3_module_*.py`` files or as Python files in each modules' ``bindings`` directory.  These files are kept under version control in the main |ns3| repository;
#. Other developers clone the repository and use the already scanned API definitions;
#. When configuring |ns3|, pybindgen will be automatically downloaded if not already installed.  Released |ns3| tarballs will ship a copy of pybindgen.

If something goes wrong with compiling Python bindings and you just want to ignore them and move on with C++, you can disable Python with:

.. sourcecode:: bash

  $ ./waf configure --disable-python ...

To add support for modular bindings to an existing or new |ns3| module, simply add the following line to its wscript build() function:

::

    bld.ns3_python_bindings()

One must also provide the bindings files (usually by running the scanning
framework).

Regenerating the Python bindings
================================

|ns3| will fail to successfully compile the Python bindings if the C++
headers are changed and no longer align with the stored Python bindings.
In this case, the developer has two main choices:  1) disable Python
as described above, or 2) update the bindings to align with the new C++
API.

Process Overview
################

|ns3| has an automated process to regenerate Python bindings from the C++
header files.  The process is only supported for Linux at the moment
(ns-3.33) because the project has not found a contributor yet to test and
document the capability on macOS. In short, the process currently 
requires the following steps on a Linux machine.

1.  Prepare the system for scanning by installing the prerequisites,
    including a development version of ``clang``, the ``CastXML`` package,
    ``pygccxml``, and ``pybindgen``.
2.  Perform a scan of the module of interest or all modules

Installing a clang development environment
##########################################

Make sure you have a development version of the clang compiler installed
on your system.  This can take a long time to build from source.  Linux
distributions provide binary library packages such as ``libclang-dev``
(Ubuntu) or ``clang-devel`` (Fedora).

Installing other prerequisites
##############################

``cxxfilt`` is a new requirement, typically installed using ``pip`` or ``pip3``; e.g.

.. sourcecode:: bash

    sudo pip3 install --user cxxfilt

See also the wiki for installation notes for your system.

Set up a ``bake`` build environment
###################################

Try the following commands:

.. sourcecode:: bash

    $ cd bake
    $ export PATH=`pwd`/build/bin:$PATH
    $ export LD_LIBRARY_PATH=`pwd`/build/lib${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}
    $ export PYTHONPATH=`pwd`/build/lib${PYTHONPATH:+:$PYTHONPATH}
    $ mkdir -p build/lib

Configure
#########

Perform a configuration at the bake level:

.. sourcecode:: bash

    $ ./bake.py configure -e ns-3-dev -e pygccxml

The output of ``./bake.py show`` should show something like this: 


.. sourcecode:: bash

    $ ./bake.py show

Should say (note:  some are OK to be 'Missing' for Python bindings scanning):

.. sourcecode:: text

    -- System Dependencies --
     > clang-dev - OK
     > cmake - OK
     > cxxfilt - OK
     > g++ - OK
     > gi-cairo - OK or Missing
     > gir-bindings - OK or Missing
     > llvm-dev - OK
     > pygobject - OK or Missing
     > pygraphviz - OK or Missing
     > python3-dev - OK
     > python3-setuptools - OK
     > qt - OK or Missing
     > setuptools - OK

Note that it is not harmful for Python bindings if some of the items above
report as Missing.  For Python bindings, the important
prerequisites are clang-dev, cmake, cxxfilt, llvm-dev, python3-dev,
and python3-setuptools.  In the following process, the following programs
and libraries will be locally installed:  castxml, pybindgen, pygccxml,
and |ns3|. 

Note also that the `ns-3-allinone` target for bake will also include the
`pygccxml` and `ns-3-dev` targets (among other libraries) and can be
used instead, e.g.:

.. sourcecode:: bash

    $ ./bake.py configure -e ns-3-allinone

Download
########

Issue the following download command.  Your output may vary depending on what
is present or missing on your system.

.. sourcecode:: bash

    $ ./bake.py download
     >> Searching for system dependency llvm-dev - OK
     >> Searching for system dependency clang-dev - OK
     >> Searching for system dependency qt - Problem
     > Problem: Optional dependency, module "qt" not available
       This may reduce the  functionality of the final build. 
       However, bake will continue since "qt" is not an essential dependency.
       For more information call bake with -v or -vvv, for full verbose mode.
    
     >> Searching for system dependency g++ - OK
     >> Searching for system dependency cxxfilt - OK
     >> Searching for system dependency setuptools - OK
     >> Searching for system dependency python3-setuptools - OK
     >> Searching for system dependency gi-cairo - Problem
     > Problem: Optional dependency, module "gi-cairo" not available
       This may reduce the  functionality of the final build. 
       However, bake will continue since "gi-cairo" is not an essential dependency.
       For more information call bake with -v or -vvv, for full verbose mode.
    
     >> Searching for system dependency gir-bindings - Problem
     > Problem: Optional dependency, module "gir-bindings" not available
       This may reduce the  functionality of the final build. 
       However, bake will continue since "gir-bindings" is not an essential dependency.
       For more information call bake with -v or -vvv, for full verbose mode.
    
     >> Searching for system dependency pygobject - Problem
     > Problem: Optional dependency, module "pygobject" not available
       This may reduce the  functionality of the final build. 
       However, bake will continue since "pygobject" is not an essential dependency.
       For more information call bake with -v or -vvv, for full verbose mode.
    
     >> Searching for system dependency pygraphviz - Problem
     > Problem: Optional dependency, module "pygraphviz" not available
       This may reduce the  functionality of the final build. 
       However, bake will continue since "pygraphviz" is not an essential dependency.
       For more information call bake with -v or -vvv, for full verbose mode.
    
     >> Searching for system dependency python3-dev - OK
     >> Searching for system dependency cmake - OK
     >> Downloading castxml - OK
     >> Downloading netanim - OK
     >> Downloading pybindgen - OK
     >> Downloading pygccxml - OK
     >> Downloading ns-3-dev - OK
    
Build
#####

Next, try the following command:

.. sourcecode:: bash

    $ ./bake.py build

A build report should be printed for each package, such as:

::

     >> Building castxml - OK
     >> Building netanim - OK
     >> Building pybindgen - OK
     >> Building pygccxml - OK
     >> Building ns-3-dev - OK

However, if there is a problem with the bindings compilation (or with the
C++ code), it will report a failure instead:

::

     >> Building ns-3-dev - Problem
     > Error:  Critical dependency, module "ns-3-dev" failed 
       For more information call Bake with --debug and/or -v, -vvv, for full verbose mode (bake --help)

At this point, it is recommended to change into the ns-3-dev directory and
work further from there, because the API scanning dependencies have been
built and installed successfully into the `build` directory.
The output of './waf configure' can be inspected to see if Python API scanning
support is enabled:

.. sourcecode:: text

  Python API Scanning Support   : enabled

It may say something like this, if the support is not active or something
went wrong in the build process:

.. sourcecode:: text

  Python API Scanning Support   : not enabled (Missing 'pygccxml' Python module)

In this case, the user must take additional steps to resolve.  For the
API scanning support to be detected, the castxml binary must be in the
shell's PATH, and pygccxml must be in the PYTHONPATH.

LP64 vs ILP32 bindings
######################

Linux (64-bit, as most modern installations use) and MacOS use different
data models, as explained here:  https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.3.0/com.ibm.zos.v2r3.cbcpx01/datatypesize64.htm

Linux uses the LP64 model, and MacOS (as well as 32-bit Linux) use the ILP32
model.  Users will note that there are two versions of bindings files in
each ns-3 module directory; one with an ILP32.py suffix and one with 
an LP64.py suffix.  Only one is used on any given platform.  The main
difference is in the representation of the 64 bit integer type as either
a 'long' (LP64) or 'long long' (ILP32).  

The process (only supported on Linux at present) generates the LP64
bindings using the toolchain and then copies the LP64 bindings to the
ILP32 bindings with some type substitutions automated by Waf scripts.
  
Rescanning a module
###################

To re-scan a module:

.. sourcecode:: bash

    $ cd source/ns-3-dev
    $ ./waf --apiscan=wifi

To re-scan all modules:

.. sourcecode:: bash

    $ cd source/ns-3-dev
    $ ./waf --apiscan=all

Generating bindings on MacOS
############################

In principle, this should work (and should generate the 32-bit bindings).
However, maintainers have not been available to complete this port to date.
We would welcome suggestions on how to enable scanning for MacOS. 

Organization of the Modular Python Bindings
===========================================

The ``src/<module>/bindings`` directory may contain the following files, some of them optional:

* ``callbacks_list.py``: this is a scanned file, DO NOT TOUCH.  Contains a list of Callback<...> template instances found in the scanned headers;
* ``modulegen__gcc_LP64.py``: this is a scanned file, DO NOT TOUCH.  Scanned API definitions for the GCC, LP64 architecture (64-bit)
* ``modulegen__gcc_ILP32.py``: this is a scanned file, DO NOT TOUCH.  Scanned API definitions for the GCC, ILP32 architecture (32-bit)
* ``modulegen_customizations.py``: you may optionally add this file in order to customize the pybindgen code generation
* ``scan-header.h``: you may optionally add this file to customize what header file is scanned for the module.  Basically this file is scanned instead of ns3/<module>-module.h.  Typically, the first statement is #include "ns3/<module>-module.h", plus some other stuff to force template instantiations;
* ``module_helpers.cc``: you may add additional files, such as this, to be linked to python extension module, but they have to be registered in the wscript. Look at src/core/wscript for an example of how to do so;
* ``<module>.py``: if this file exists, it becomes the "frontend" python module for the ns3 module, and the extension module (.so file) becomes _<module>.so instead of <module>.so.  The <module>.py file has to import all symbols from the module _<module> (this is more tricky than it sounds, see src/core/bindings/core.py for an example), and then can add some additional pure-python definitions.   

Historical Information
**********************

If you are a developer and need more background information on |ns3|'s Python bindings, please see the `Python Bindings wiki page <http://www.nsnam.org/wiki/NS-3_Python_Bindings>`_.  Please note, however, that some information on that
page is stale.